Welcome to the Biotage Expand Your Horizon Blog

      The Problem of PFAS: Part 2 - Top Regulations

      June 3, 2021 at 3:00 AM / by David Gallagher posted in SPE solid phase extraction, Sample preparation, EPA Method 537.1, per- and polyfluoroalkyl substances, PFAS, Drinking water, EPA Method, water extractions, SPE, perfluorinated compounds, PFOS, extraction, ISOLUTE 101

      0 Comments

      Welcome back! As the title indicates, this is Part 2 of an ongoing series where we discuss what’s going on with PFAS. For those of you who may not have read Part 1, you missed out on a summary of the controversy surrounding this group of compounds and I would recommend going back and taking a quick read through it to make sure that you’re caught up. 

      Read More

      Why Concentrate Down to 1 mL End Point? Can you go down to 0.5 mL?

      April 29, 2021 at 3:00 PM / by Michael Ebitson posted in SPE solid phase extraction, Sample preparation, tech tips, EPA Method, Drying, application, evaporation systems, lower volume samples

      0 Comments

      When working with regulated environmental methods have you ever asked yourself why are all these extracts concentrated down to one milliliter (mL) final volume? This is true for most soil and aqueous methods. Of course, a few methods will require a more diluted final volume but not many.

      Read More

      EPH Fractionation & Bottlenecks in the Laboratory

      December 7, 2020 at 1:38 PM / by Matt Harden posted in EPA Method, Fractionation

      0 Comments

      Anyone familiar with EPH methods such as those developed by the Massachusetts or New Jersey Department of Environmental Protection is familiar with the long and grueling process of fractionation.

      Read More

      EPA Methods and the Use of Drying Techniques

      November 30, 2020 at 4:43 PM / by Deanna Bissonnette posted in SPE solid phase extraction, contamination, solvent evaporation, EPA Method, Drying, application, sodium sulfate

      0 Comments

      Do you ever tire of using sodium sulfate to dry your extracts? I know I do. That is why, whenever I get the chance to avoid using it, I do. The worst experience when using sodium sulfate is when you do not use enough of it, and the sodium sulfate reaches its maximum capacity leading to water breakthrough into your ‘what was supposed to be a dried extract.’ Then, you must dry the extract again with more sodium sulfate.

      Read More

      Posts by Tag

      See all